Panels

We are the UK leader for manufactured bamboo panels ranging from 7mm up to 40mm with many sizes in between. The size is 2440x1220mm. All panels shown come unfinished but can take an oil, lacquer, stain, paint, fire treatment and can also be easily cut, CNC’d or laser cut depending on the use as well as digitally printed to.
These panels come as a 1ply (19mm) or 5ply (20 & 40mm) and all the other thicknesses are 3ply. They come in both Plain and side pressed along with some in the density (Strand woven type)
For our range of decorative wall cladding panels, please check out our wall coverings section!

worktops

Density / Strand Woven Worktops
2 products

Density / Strand Woven Worktops

View products

We offer a wide range of worktops in the standard 40mm thicknesses but also a select range in the 20mm. They come in a 3ply (20mm) and 5ply and 9ply in the 40mm. Our standard sizes are 2,3 & 4metres by 620mm in the 40mm and 3610×650 in the 20mm as well as a few other sizes such as 3000×700 as well as 2440x1220mm.
These are available off the shelf, but we also offer a cutting and finishing service if required, please call us to discuss your specific project requirements.

Veneers

Ideal for the laser cutting market, model makers or for where the veneer needs to be bonded to another material or substrate. We offer a range of 0.6mm paper backed veneers as well as thick veneers in 3 & 5mm in Plain and Side pressed as well as 4mm in the strand woven.
Note: We sell the 3 & 5mm in a minimum order quantity of 10 and the 0.6mm veneer in minimum packs of 50 or 100 unless you collect.
Please call us for more details on these veneers.

Decorative wall coverings

Profiled Boards
6 products

Profiled Boards

View products
Slats on an 18mm board
2 products

Slats on an 18mm board

View products

Transforming our panels into a decorative cladding is a super effective way of using the bamboo for lots of different applications, the most popular being wall panelling, reception and counter fronts, bar fronts, walls behind reception areas, feature walls, etc.
We have come up with a range of profiled sizes cut from our 19mm 1ply which can be left unfinished or for an e/o can be lacquered, oiled or Fire rated or even coloured as required.
We also offer loose slats which can simply be fixed or glued direct to a substrate, as well as pre-made boards with the slats screwed to the boards; the back board can be finished in any colour.
NOTE: Bespoke profiled sizes or cut from different panels can be made, just call the office to discuss your requirements.

For all Commercial Enquiries or Trade Rates please call |  Phone: 01793 208030 Option 1